Schneider Surge Product Description: Product Description PR series surge protector for AC 50HZ / 60HZ, 380V and below the TT, IT, TN-CS and other power supply system can be connected to a lightning equipotential designed to conform GB18802.1- 2002 and IEC61643-1: 1998 technical standards, design and installation of the 35mm shell electric rail, failure of the product built from the device, when the power supply overcurrent protection due to overheating, breakdown failure, failure from the device can automatically remove it from the power line out, while visual alarm indication module can replace under operating voltage characteristics of a product, can be replaced without power protection unit 2, the maximum tolerable 40KA (8 / 20μS) lightning current impact 3, the action response time of less than 25 nano sec 4, color of visible window shows operating status, green (normal) to red (fault) 2, the product size is 72MM wide and 3, the product testing center by Beijing Lightning, with test reports mounting position and application C-level surge Protector (SPD) protection for lightning strikes and other potential connections installed in LPZ1 area, LPZ2 region LPZ3 zone at the junction, usually installed in front of the household distribution box, computer center, information equipment, electronic equipment and control devices or recently The outlet box. Replaceable PR (PRD) Series Maximum discharge current: 65/40/15 / 8kA (8 / 20μs) nominal discharge current: 20/15/5 / 2kA (8 / 20μs) voltage protection level: 2 / 1.8 / 1.5 /1.2kV provide common mode and differential mode has two kinds of protection status indication window fixed ST Series Maximum discharge current: 65/40 / 10kA (8 / 20μs) nominal discharge current: 20/15 / 5kA (8 / 20μs ) voltage protection level: 1.5 / 1.2 / 1kV provide common mode and differential mode has two kinds of protection status indication window PRI series network rated voltage: 6/12 ~ 48V maximum discharge current: 10kA (8 / 20μs) voltage protection level: 15 / 70V for digital communications network protection PRF1 Series Maximum surge current: (10 / 350μs) protection level 60kA: Up≤4kV maximum continuous operating voltage: 255V Response time: <100ns for Overhead Line protection Applications: Construction / Civil Residential / Communications PR pluggable surge protector Model: PR 65r 65kA 1P 340V PR 65r 65kA 1P + N 340V PR 65r 65kA 2P 340V PR 65r 65kA 3P 340V PR 65r 65kA 3P + N 340V PR 65r 65kA 4P 340V PR 40r 40kA 1P 340V PR 40 40kA 1P 340V PR Gnr 1P 260V PR Gn 1P 260V PR 40r 40kA 1P + N 340V PR 40 40kA 1P + N 340V PR 40r 40kA 2P 340V PR 40 40kA 2P 340V PR 40r 40kA 3P 340V PR 40 40kA 3P 340V PR 40r 40kA 3P + N 340V PR 40 40kA 3P + N 340V PR 40r 40kA 4P 340V PR 40 40kA 4P 340V PR 20r 20kA 1P 340V PR 20 20kA 1P 340V PR 20r 20kA 1P + N 340V PR 20 20kA 1P + N 340V PR 20r 20kA 2P 340V PR 20 20kA 2P 340V PR 20r 20kA 3P 340V PR 20 20kA 3P 340V PR 20r 20kA 3P + N 340V PR 20 20kA 3P + N 340V PR 20r 20kA 4P 340V PR 20 20kA 4P 340V PR 10 10kA 1P 340V PR 10 10kA 1P + N 340V PR 10 10kA 2P 340V PR 10 10kA 3P 340V PR 10 10kA 3P + N 340V PR 10 10kA 4P 340V